A simple model for deep dynamic stall conditions

The present study is focused on modeling of dynamic stall behavior of a pitching airfoil. The deep stall regime is in particular considered. A model is proposed, which has a low implementation and computational complexity but yet is able to deal with different types of dynamic stall conditions, including those characterized by multiple vortex shedding at the airfoil leading edge. The proposed model is appraised against an extensive data set of experimental (α,C_L) curves for NACA0012. The results of an existing widely used model, having comparable complexity, are also shown for comparison. The proposed model is able to well reproduce not only the classic curves of deep dynamic stall but also the curves characterized by lift oscillations at high angles of attack due to the shedding of multiple vortices. Furthermore, the model appears to be robust to variations of its parameters from the optimal values and of the airfoil geometry. Finally, the model is successfully implemented in a commercial CFD software and applied to the simulation of a vertical axis wind turbine within the actuator cylinder approach. The accuracy of the prediction of the turbine power coefficient in the whole rotation cycle is very good for the optimal working condition of the turbine, for which the model parameters were calibrated. Fairly good accuracy is also obtained in significantly different working conditions without any further calibration.     

Design of energy‐efficient train speed profiles considering fixed‐block signaling system

In dense traffic railway networks, trains may often slow down or stop between stations owing to previous train delays. If preceding train trajectory can be predicted, energy‐efficient driving can be achieved by suppressing unnecessary speed changes. In this paper, we propose an algorithm to find energy‐efficient driving considering fixed‐block signaling (FBS) system by using dynamic programming (DP). DP is suitable for use because it can optimize the control inputs with discrete and state constraints. In this paper, we discuss energy‐efficient driving by considering a FBS system using some case studies of simulation. In the simulation, we examine a technique to drive an express train in an energy‐efficient way when the preceding local train is running toward the station with passing loops. The results show that the proposed method can derive complex speed profiles for energy‐efficient driving and the train can be operated with a maximum reduced energy consumption of 8.3%.     

Dynamic tensile mechanical properties and failure mode of zirconium diboride-silicon carbide ceramic composites

Dynamic indirect tension experiments were performed on zirconium diboride-silicon carbide (ZrB₂−20%SiC) ceramic. Flattened Brazilian disc specimens of ZrB₂−20%SiC were prepared to conduct dynamic tensile tests using the modified Split Hopkinson pressure bar system. The tensile experiments were completed at the range of loading rates from 7.53 to 74.71 GP s⁻¹. The tensile experimental results revealed that the zirconium diboride-silicon carbide ceramic composite is rate-sensitive in terms of the tensile strength and failure mode. The dynamic tensile strength increases linearly with the loading rate and changes from 195 MPa at 7.53 GP s⁻¹ to 654 MPa at 74.71 GP s⁻¹. Moreover, the dynamic tensile strength decreases with the increase in critical fracture time, which conforms to Tuler and Butcher's fracture criterion. In dynamic experiments, a high-speed camera was used to examine the tensile failure process, and fragments were collected to analyze the dynamic tensile failure mechanism. The tensile fracture mode of ZrB₂−20%SiC obviously showed the sensitivity of the loading rate. The fragment size of ZrB₂−20%SiC ceramic decreased but the quantity of fragments increased as the loading rate increased.     

热变形工艺对含硫非调质钢流变应力及组织的影响

在变形温度950~1150 ℃和应变速率0.01~5 s^-1下,通过Gleeble-3500热模拟试验机进行单道次压缩试验,研究了热变形工艺对含硫非调质钢F45MnVS流变应力及组织的影响。结果表明:随着应变速率的增大,热压缩过程中的峰值应力增加,随着温度的升高,峰值应力降低;动态再结晶平均晶粒尺寸随着应变速率、变形量的增加而减小,随着温度的提高而增大。     

Engineering Nanorobots for Tumor-Targeting Drug Delivery: From Dynamic Control to Stimuli-Responsive Strategy

Nanotechnology has been widely applied to the fabrication of drug delivery systems in the past decades. Recently, with the progress made in microfabrication approaches, nanorobots are steadily becoming a promising means for tumor-targeting drug delivery. In general, nanorobots can be divided into two categories: nanomotors and stimuli-responsive nanorobots. Nanomotors are nanoscale systems with the ability to convert surrounding energies into mechanical motion, whereas stimuli-responsive nanorobots are featured with activatable capacity in response to various endogenous and exogenous stimulations. In this minireview, the dynamic control of nanomotors and the rational design of stimuli-responsive nanorobots are overviewed, with particular emphasis on their contribution to tumor-targeting therapy. Moreover, challenges and perspectives associated with the future development of nanorobots are presented.     

隧道洞口上方危岩崩塌块石运动规律及其对隧道的危害

为揭示危岩崩塌块石的运动规律及其对下方隧道洞口的危害,以都香高速昭通段乐红隧道洞口高陡边坡危岩区崩塌体为研究对象,运用理论计算与Rockfall数值计算2种形式对危岩区崩塌体失稳后块石的运动特征进行预测,运用Abaqus有限元软件模拟不同初速度、不同冲击落点下块石冲击隧道结构的动力响应,揭示不同因素对块石冲击隧道结构的影响程度.结果 显示:理论计算与Rockfall数值计算结果吻合,崩塌块石经坠落、碰撞、滚动最终会与隧道引洞段上表面发生碰撞;与冲击落点相比,块石初速度对隧道结构的动力响应特性影响更大;块石冲击落点位于隧道圆拱圆心正上方位置时对隧道结构的损伤最大;不同冲击落点对碰撞回弹后块石的速度影响不大.     

Mixture ratio modeling of dynamic systems

Any knowledge extraction relies (possibly implicitly) on a hypothesis about the modelled-data dependence. The extracted knowledge ultimately serves to a decision-making (DM). DM always faces uncertainty and this makes probabilistic modelling adequate. The inspected black-box modeling deals with “universal” approximators of the relevant probabilistic model. Finite mixtures with components in the exponential family are often exploited. Their attractiveness stems from their flexibility, the cluster interpretability of components and the existence of algorithms for processing high-dimensional data streams. They are even used in dynamic cases with mutually dependent data records while regression and auto-regression mixture components serve to the dependence modeling. These dynamic models, however, mostly assume data-independent component weights, that is, memoryless transitions between dynamic mixture components. Such mixtures are not universal approximators of dynamic probabilistic models. Formally, this follows from the fact that the set of finite probabilistic mixtures is not closed with respect to the conditioning, which is the key estimation and predictive operation. The paper overcomes this drawback by using ratios of finite mixtures as universally approximating dynamic parametric models. The paper motivates them, elaborates their approximate Bayesian recursive estimation and reveals their application potential.     

深圳抽水蓄能电厂球阀动水关闭试验研究

为验证深圳抽水蓄能电厂球阀具备动水关闭能力且不会产生有害振动进行了球阀动水关闭试验,获得不同负荷下球阀动水关闭实测各项动应力值及振动位移值。试验数据表明深蓄电厂球阀在不关闭导叶情况下能可靠关闭阻断上游来水,验证了在100%负荷动水关闭球阀最不利工况下,球阀混凝土支墩结构强度满足设计要求,球阀体系的振动位移是安全的,且对设备未产生有害变形及损坏。     

Extended-state-observer-based dynamic surface control of flexible-joint robot systems with input saturation

This article presents an extended-state-observer-based dynamic surface control approach for flexible-joint robot systems with asymmetric input saturation and large unknown dynamic knowledge. Traditional controllers for flexible-joint robot systems usually use approximation technology to deal with unknown dynamics knowledge. Unlike the traditional control algorithm, this article utilizes an extended state observer to estimate the unknown dynamics. For the closed-loop system, the delay strategy handles the time-scale separation issue, the filtering system overcomes the “explosion of differentiation” caused by the repeated differentiation of auxiliary control signals, and the mean-value-theorem solves the input saturation problem of the actuator. The stability analysis implies that estimation errors of extended state observers (ESOs) and other state variables are semiglobally uniformly ultimately bounded. Compared with fuzzy control algorithms, the novel ESO-based dynamic surface control approach not only omits online learning time but also uses only a few control parameters to obtain satisfactory tracking performance. Finally, a comparison simulation experiment is provided to illustrate the effectiveness of the gained conclusions.     

Dynamic forecasting of individual cow milk yield in automatic milking systems

Accurate forecasting of dairy cow milk yield is useful to dairy farmers, both in relation to financial planning and for detection of deviating yield patterns, which can be an indicator of mastitis and other diseases. In this study we developed a dynamic linear model (DLM) designed to forecast milk yields of individual cows per milking, as they are milked in milking robots. The DLM implements a Wood's function to account for the expected total daily milk yield. It further implements a second-degree polynomial function to account for the effect of the time intervals between milkings on the proportion of the expected total daily milk yield. By combining these 2 functions in a dynamic framework, the DLM was able to continuously forecast the amount of milk to be produced in a given milking. Data from 169,774 milkings on 5 different farms in 2 different countries were used in this study. A separate farm-specific implementation of the DLM was made for each of the 5 farms. To determine which factors would influence the forecast accuracy, the standardized forecast errors of the DLM were described with a linear mixed effects model (lme). This lme included lactation stage (early, middle, or late), somatic cell count (SCC) level (nonelevated or elevated), and whether or not the proper farm-specific version of the DLM was used. The standardized forecast errors of the DLM were only affected by SCC level and interactions between SCC level and lactation stage. Therefore, we concluded that the implementation of Wood's function combined with a second-degree polynomial is useful for dynamic modeling of milk yield in milking robots, and that this model has potential to be used as part of a mastitis detection system.